Tag Archives: strawbees

by

Design Challenge Makerspace

img_7614-1

I’ve said it before, but I’ll say it again. We are so fortunate to have the University of Georgia right next to our school and even more fortunate to have instructors like Gretchen Thomas who collaborate with local schools.  Gretchen and I have been collaborating for about 3 years now, and each year we try some new things.  We’re always looking for ways to improve the makerspace time at our school as well as the opportunities available to students.

Gretchen teaches an undergraduate course at UGA all related to maker education, design thinking, STEAM, and more. Every Tuesday and Thursday, at least 4 of her students come to our library to work with students who sign up for our open makerspace time.

This semester we are once again trying something new. Rather than try to do something new on Tuesday and Thursday, students sign up for a 2-day makerspace that gives them time to work toward finishing a project rather than feeling rushed. In addition, we are thinking about design challenges as well as seeking solutions to authentic problems.

This week, we had our first UGA group of the semester and they offered a chariot building design challenge.  Students had access to Strawbees, popsicle sticks, cups, straws, tape, paper, scissors, and anything else in our maker supply cart.  Students from 1st, 3rd, 4th, and 5th grade came to the sessions.

The UGA group started out my explaining what a chariot is.  Then, they gave students the task.  Design a chariot that can be pulled by a Sphero robot.  Students grouped themselves in groups of 2-4 and brainstormed designs on paper.

Next, students started construction of their chariots.  There was a lot of trial and error during this process.  Designs on paper didn’t always translate to physical designs so adjustments were made.  The UGA students also got out some Spheros so students could check their design to make sure the Sphero fit in the right places.  No driving was done on day 1.

Students left their designs on the table in the makerspace so they were ready for day 2.  On day 2, students finished designs and began testing their work with a Sphero.  Most designs did not work out on the first try, so students brainstormed modifications and got to work. I loved listening to their thought process in deciding what was problematic and how they could fix that aspect of the design.

I also saw students considering the settings of the Sphero to change the driving speed in order to navigate an obstacle course of coffee cans and ramps with their Sphero.

I really loved this two-day model because I saw students able to finish a project and actually take time to redesign.  Students loved coming to makerspace 2 days during the week rather than just one.  We’ll keep considering how this supports students creation and how it might get in the way of opportunities.

I also have a group of students who are wanting to work on individual projects and Gretchen is going to help me pair UGA mentors with these students as a 2nd piece of makerspace.

We’ll see where this goes, but the potential is looking pretty miraculous!

by

The Makerspace Is Open with a New Badging System

img_8887UGA is back in session which means our makerspace is cranking up again.  We already have some curriculum connections planned for special projects, but our students look forward to the weekly open makerspace times on Tuesdays and Thursdays from 11-12:30.

Gretchen Thomas and her UGA class collaborate with us to provide a weekly time where students can signup to explore various tools and projects in our makerspace.  Four UGA students come each time and lead up to 15 students every 30 minutes in the makerspace so that I can also teach classes at the same time.

img_8875

Gretchen and I are have learned a lot during our collaboration together, and I love that she’s always pushing her class to try something new.  For our first few sessions this year, the UGA students are presenting a maker-related book to the students and an activity to accompany that book.  There’s not really enough time to read the entire book and still make something, but they at least are able to show the book, talk a bit about it, and then make something with the students.

img_8874

For our first session, the UGA students read or showed Iggy Peck Architect.  At the end of the book, they invited our students in 1st, 3rd, 4th, and 5th grades to become an architect and use Strawbees to build the tallest free standing tower.

img_8873

I loved watching the UGA students decide how much information to give the students versus when to let them discover things on their own.  In one group, they just gave them the Strawbees and straws and said “build”.

Then, in another group they gave some examples of how the straws and Strawbees could connect to one another.  The amount of guidance definitely impacted the type of structures made.

img_8881

I don’t know that we have a firm answer on how much structure to offer to the students, but I’m glad that we are always thinking about how much is too much.  I think we certainly stayed conservative on how much we told the students.  Every structure was different and students found things that worked really well and things that failed miserably.  In the end, the important thing is that we really didn’t have students who gave up or who even got extremely upset because they didn’t “win”.  That’s the true spirit of making.

img_8895

One new addition this year is something we’ve talked about for a long time.  So many students come to the makerspace, that it’s hard to track who has learned what tool or skill.  I really wanted a badging system but didn’t think I had time to make it.  Gretchen and I have talked through this many times and discussed the idea of badges for specific tools like Sphero, Duct Tape, LittleBits, etc and badges for skills such as problem-solver, thinking outside the box, teamwork, etc.

Gretchen took it upon herself to make this happen for us.  She started making badges that students would attach to chain necklaces.  Students would earn a badge for the tool they explored and the group they worked with as well as have an opportunity to earn rare badges for skills or qualities.  Gretchen and her students will continue to design badges and add them to the collection.  They will be stored in plastic drawers in the makerspace.  Students will hang their necklaces on a hook in the space and grab them when they come to makerspace.

img_8896

We’ll easily be able to look at badges and see which students have learned which tools and which students have demonstrated the skills of a maker.

I can’t wait to see where this goes, and I’m so thankful for Gretchen and her class making this happen!