Tag Archives: cardboard

by

Making with a Cause: Cardboard Awards

One thing I’ve been very interested in with our makerspace is “making with a cause”. I see so many posts on social media where someone has done something amazing for someone else by using skills and materials often found in makerspaces. From 3D-printed shells for turtles to scarves for the homeless shelter, there are so many ways we can give back to our community through making.

I love that my friend, Gina Seymour, has created a whole book on “making with a cause” and I look forward to my copy arriving in the mail.  Her book, Makers with a Cause: Creative Service Projects For Library Youth, has a whole section on getting started and another section with examples of projects from animal welfare to health/wellness to community service.

For this month’s theme of cardboard, we asked students to think about someone who deserved an award. What would the award be? What would it look like? Why would the person receive the award?  Students designed their awards out of cardboard.  Some made medals to hang around necks.  Others made trophies or even booklets. The only requirement was to use cardboard.

We asked students to start by brainstorming ideas on paper, and then they transferred those ideas onto cardboard. Using Makedo saws, scissors, and canary cardboard cutters, students worked with UGA mentors to cut out their award designs.  They embellished these with duct tape, string, washi tape, and other supplies from our makerspace supply cart.

As students completed their cardboard awards, they came to me at the computer to print a certificate to accompany the award. I found an easy certificate generator called Certificate Magic.

It allows you to choose the type of award you want to print and then fill in the details in a very simple form.  Then, you can download your award as a PDF and print. Students named their award, identified who they were giving it to, and chose a reason for the award. I loved hearing who they were giving the awards to and why.

A few examples included:

  • A T-rex award given to someone’s sister for acting like a dinosaur
  • A Golden Bracelet award given to someone’s sister for being a good sister
  • A Golden Butterfly award given to someone’s whole family for supporting her
  • A Football Trophy given to a dad for being a supporter of the Georgia Bulldogs
  • A Butterfly Necklace award given to a friend for being a good friend

There was even a special surprise award for me.  Somehow this student kept his award details a secret until he gave me the award.  He even asked if he could have privacy while he filled in the Certificate Magic form.  My award was called “Read More Books” for being a great librarian.  He even made the cardboard award look like a book with the award details inside.

I’m loving this component of our makerspace so far this year and I look forward to seeing what people end up creating for others in the coming months.

 

by

Makerspace Begins: Themes and Options

Our makerspace has once again cranked up for the 2018-19 school year. Once again, I’m collaborating with Gretchen Thomas and her class of over 30 undergraduates from the University of Georgia. Every year, Gretchen and I meet to think about what our open makerspace time might look like, ,and every time we make some changes and try something new.

Our idea for this year is offer specific themes around materials or tools rather than try to squeeze in so many different things in a short amount of time.

For September, we’ve chosen cardboard as our material.  Across 3 weeks, we hope to offer 3 short-term challenges using cardboard.  One of those challenges will be a “making with a cause” challenge.

  • Week 1: Design a hat. This can be interpreted however students want.
  • Week 2: Making with a Cause. Make an award. Students will choose someone who deserves an award. Make the award. Give the award to that person with an explanation of why they deserve the award.
  • Week 3: Make a puppet. Use cardboard tubes to create unique puppets and hopefully begin storytelling with them.

For the second open makerspace, we know that there will be students who aren’t interested in the short-term options and want to branch out to their own projects that take longer than 1 or 2 sessions. For these students, we will offer them a space to plan, design, and create their own inventions that have a purpose.  We wanted to keep this option open ended, but encourage students to develop something using cardboard that actually has some sort of function/purpose.

In each Tuesday/Thursday session, groups of UGA students come to work alongside students. They come in 30-minutes waves so that each round of students has me and UGA students to support them. I’ve put a bit more structure on the front end of makerspace this year. Students check-in with a UGA student and then sit on the carpet. I offer a quick intro to what we are making and connect it to a book. For cardboard, we used Cardboard Kingdom by Chad Sell. Then, students move to tables to do some planning before they start grabbing cardboard and cutting.

This week, we launched into the first challenge of making a hat. Students had access to cardboard, Makedo safe saws, scissors, duct tape, and coloring supplies. Students sketched hats onto cardboard and started sawing.  There was a learning curve on the best strategies for sawing. Some students were more patient than others with the cutting process. Be warned! It was very loud and very messy. All adults circulated around to support as many students as possible.

At the end of session 1, students labeled all of their pieces of cardboard and we stored them in the makerspace.

For session 2, we spread all of the pieces out so that students could locate their cardboard to start again.

View this post on Instagram

Our hats continue. #makerspace #barrowbuddies

A post shared by Barrow Media Center (@barrowmediacenter) on

I loved seeing the hats that students came up with in such a short amount of time. At dismissal, I could see the cardboard hats parading down the halls and lots of students were curious about where they came from. Many students needed more than 2 sessions to finish. Some chose to take the materials with them to finish at home. Others left their hats behind to continue working on next week.

I have a lot of questions about how this is all going to work. It’s fast-paced and a challenge to get one group finished and cleaned up before the next group comes in. It’s also a mess of cardboard dust and bits, and I hate leaving that for our custodians. However, we’re pressing forward, expecting the miraculous, and making changes as needed along the way.

by

2018 Barrow Maker Fest

In addition to having regular makerspace sessions every Tuesday and Thursday in the spring, students also have the opportunity to work on an individual project to showcase at our annual maker fest.  To participate, students fill out a Google form sharing their possible project topics and whether they will complete the project at home or in our makerspace during school hours.  They also have the option of working alone or having a UGA mentor to help them.

I collaborate with Gretchen Thomas at UGA College of Education. I love seeing the relationships that my students develop with the UGA students, and they thrive knowing that they have a mentor to visit with and work with while they make their creations.  In the spring, she divides part of her UGA students to support our Tuesday/Thursday makerspace sessions while the other part supports students working on individual projects. My maker students don’t always meet with the same UGA student, but they have someone every Tuesday/Thursday who can support their work.

When students begin preparing for Maker Fest, we meet with them individually to see what type of project they are thinking about.

This year, I offered several categories for them to think about:

  • robots
  • cardboard
  • makey makey
  • littlebits invention
  • duct tape creation
  • 3d design
  • Scratch program
  • finger knitting
  • origami
  • strawbees structure
  • stop motion video
  • magic tricks
  • puppet/puppet show
  • magic tricks
  • something else! (This category meant students might explore our many craft books for ideas on projects to create)

Once students decided, we gathered the materials they needed and stored each project on the shelves in our makerspace storage room. This part is hard to manage and it feels a bit chaotic until we have the materials that each student needs.  Each Tuesday/Thursday they come for a 30-minute work session, gather their materials from the shelves, and work with me or a UGA student.  Some students complete their projects at home.

During the actual Barrow Maker Fest, we created a schedule so that every student who made something had two 30-minute windows to showcase their work.  There was also a schedule for classes to sign up and come to view the projects.  The entire UGA class came as well so that they could view the final projects as well as help students at tables.

In the end, 26 students showcased creations on a variety of topics which included:

  • a cardboard Earth robot
  • mason jar lights
  • a robotic arm
  • a cardboard pirate game with secret codes and a spyglass
  • a Python computer program similar to Google Translate which translated English to Pig Latin
  • a shadow puppet theater
  • a Littlebits throwing arm and car
  • Lego scenes and building station
  • 3D slinkies, Rubik’s cube, and Minecraft swords made with 3D pens
  • 3D action figure designed in Tinkercad
  • a cardboard robot suit
  • a cardboard tower
  • a car made from a mail tube
  • a stackable jewelry holder
  • magic tricks
  • Merge cubes
  • Osmo

They were so excited to share their work, have an authentic audience to entertain and ask questions, and see that their work inspired other makers.  Several students who came said they wanted to make something next year.

You can see many of these projects along with projects from other K-12 schools in the Clarke County School District at our CCSD Maker Fest.  It will be Saturday April 14 2-4PM at Clarke Central High School.  It is free and open to the public.  We hope to see you there.